Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
33
Configuration > Advanced Configuration> PTZ > Privacy Mask
Draw the Privacy Mask
2. Put the PTZ in the area you want to set up the privacy masking in.
3. Click ; use the mouse to draw the area.
4. You can drag the corners of the red rectangle area to create a polygon mask.
5. Click to finish drawing. Click to clear all of the areas you
have set without saving them.
6. Click to save the privacy mask. This area will be listed in the Privacy
Mask List area. To delete a mask and click .
Privacy Mask List
7. Check Enable Privacy Mask to enable this function.
Up to 2 areas can be created on the same image.
5.7 Clearing PTZ Configurations
Purpose: