Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
32
5.5 Configuring Park Actions
Purpose:
This feature allows the dome to start a predefined park action (scan, preset, pattern
etc.) automatically after a period of inactivity (park time).
Steps:
1. Enter the Park Action Settings config page:
Configuration > Advanced Configuration> PTZ > Park Action
Set the Park Action
2. Check the box Enable Park Action.
3. Set the Park Time inactivity time before the dome starts the park actions.
4. Select the Action Type the from the drop-down list.
Action Types
5. Click to save the settings.
5.6 Configuring Privacy Mask
Purpose:
Privacy mask enables you to mask certain areas on the live video from being viewed
and recorded.
Steps:
1. Enter the Privacy Mask Settings config page: