Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
23
Special
Preset
Function
Special
Preset
Function
44
Call pattern 4
105
Call patrol 8
45
One-touch patrol
92
Start to set limit stops
Special Preset
When you calling preset 45 (one-touch patrol), the speed dome patrols from preset
1 to 32. Before you enable this function, please configure preset 1 to 32.
4.4.3 Setting / Calling a Patrol
Purpose:
A patrol is a memorized series of presets. It can be configured and run in the patrol
settings page. There are 8 patrols that can be configured. A patrol can be configured
with 32 presets.
 Setting a Patrol:
Steps:
1. In the PTZ control panel, click to enter the patrol settings page.
2. Select a patrol number .
3. Click to enter a preset.