Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
22
3. Click to finish the setting of the current preset.
4. Click to delete the preset.
You can configure up to 256 presets.
 Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click to call the
preset.
Calling a Preset
Presets can be called by:
1. Selecting the preset from the list.
2. Selecting the preset number you require on the keyboard.
The following are predefined presets with preprogrammed commands. You cannot
configure them. For example, preset 99 is the “Start auto scan”. If you call the preset 99, the
speed dome starts auto scan function.
Table 4-3 Special Presets
Special
Preset
Function
Special
Preset
Function
33
Auto flip
93
Set limit stops manually
34
Back to initial position
94
Remote reboot
35
Call patrol 1
96
Stop a scan
36
Call patrol 2
97
Start random scan
37
Call patrol 3
98
Start frame scan
38
Call patrol 4
99
Start auto scan
39
IR cut filter in
100
Start tilt scan
40
IR cut filter out
101
Start panorama scan
41
Call pattern 1
102
Call patrol 5
42
Call pattern 2
103
Call patrol 6
43
Call pattern 3
104
Call patrol 7