Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual
21
PTZ Control Panel
Table 4-2 Descriptions of PTZ Control Panel
Button
Description
Zoom in/out
Focus near/far
Iris Open/Close
Adjust pan/tilt speed
4.4.2 Setting / Calling a Preset
Purpose:
A preset is a predefined image position.
 Setting a Preset:
Steps:
1. In the PTZ control panel, select a preset number from the preset list.
Setting a Preset
2. Use the PTZ control buttons to move the camera & lens to the required position.
 Pan the speed dome to the right or left.
 Tilt the speed dome up or down.
 Zoom in or out.
 Refocus the lens.