Instruction manual

SmartWatch® IP PTZ Dome Cameras - Manual

2.2.1 Static IP Connection

Before you start:

Please apply for a static IP from an ISP (Internet Service Provider). With the static IP

address, you can connect the network speed dome via a router or connect it to the

WAN directly.

 Connecting the network speed dome via a router

Steps:

1. Connect the network speed dome to the router.

2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2

Detecting and Changing the IP Address for detailed IP address configuration of the

speed dome.

3. Save the static IP in the router.

4. Set port mapping, E.g., 80, 8000 and 554 ports. The steps for port mapping vary on

different routers. Please call the router manufacturer for assistance with port

mapping.

Refer to Appendix 2 for detailed information about port mapping.

5. Connect to the network speed dome through a web browser or the client software

over the internet.

Accessing the Speed Dome through Router with Static IP

 Connecting the network speed dome with static IP directly

You can also save the static IP in the speed dome and directly connect it to the internet

without using a router. Refer to Section 2.1.2 Detecting and Changing the IP Address

for detailed IP address configuration of the speed dome.

Accessing the Speed Dome with Static IP Directly