User manual

UserManualofIRNetworkSpeedDome
89
Example:
Whenthespeed domesareconnectedtothesame router,you can forward the
ports of a speed dome as 80, 8000, 8200~8210 and 554 with IP address
192.168.1.23,andtheportsofanotherspeeddomeas81,8001,8201~8211and
555withIP192.168.1.24.Refertothestepsasbelow:
Steps:
1. Asthesettingsmentionedabove,forwardtheport80,8000,8200~8210and554
forthenetworkspeeddomeat192.168.1.23
2. Forward theport81, 8001, 8201~8211and 555 for the networkspeed domeat
192.168.1.24.
3. EnableALLorTCPprotocols.
4. ChecktheEnablecheckboxandclick .

FigureA.2.3PortMapping

Note: The port of the network speed dome cannot conflict with other ports. For
example, some webmanagementportof the router is 80. Change thespeed dome
portifitisthesameasthemanagementport.