User manual

UserManualofIRNetworkSpeedDome
87
information; you can click  to expand the device table and hide the
network parameter panel on the right side, or click  to show the
networkparameterpanel.
 Modifynetworkparameters
Steps:
1. Selectthedevicetobemodifiedinthedevicelistandthenetworkparametersof
the device will be displayed in the Modify Network Parameters panel on the
rightside.
2. Editthemodifiablenetworkparameters,e.g.IPaddressandportnumber.
3. EnterthepasswordoftheadminaccountofthedeviceinthePasswordfieldand
click  tosavethechanges.

FigureA.1.2ModifyNetworkParameters


Restoredefaultpassword
Steps:
1. Contactourtechnicalengineerstogettheserialcode.
Note:Serialcodeisa seriesofcharacterscombinedbythe starttimeand theserial
numberofthedevice.
2. InputthecodeintheSerialcodefieldandclick  torestorethedefault
password.