User manual

UserManualofIRNetworkSpeedDome
83
2. Click  or  torestorethedefaultsettings.
Note: Clicking  restores all the parameters to default settings including
theIPaddressanduserinformation.Pleaseusethisbuttonwithcaution.

Figure1011 RestoreDefaultSettings

10.6.3 Importing/ExportingConfigurationFile
Steps:
1. EntertheMaintenanceinterface:
Configuration>BasicConfiguration>System>Maintenance
OrConfiguration>AdvancedConfiguration>System>Maint enance
2. Click  toselectthelocalconfigurationfileandthenclick 
tostartimportingconfigurationfile.
Note:Youneedtorebootthespeeddomeafterimportingconfigurationfile.
3. Click  and set the saving path to save the configuration file in local
storage.

Figure1012 Import/ExportConfigurationFile

10.6.4 UpgradingtheSystem
Steps:
1. EntertheMaintenanceinterface:
Configuration>BasicConfiguration>System>Maintenance
OrConfiguration>AdvancedConfiguration>System>Maint enance