User manual

UserManualofIRNetworkSpeedDome
68
domemodel.
4. Click  toedittherecordschedule.

Figure77 RecordSchedule

5. Choosethedaytosettherecordschedule.
(1) Setalldayrecordorsegmentrecord:
 If you want to configure the allday recording, please check the All Day
checkbox.
 If you want to record in different time sections, check the Customize
checkbox.SettheStartTimeandEndTime.
Note:Thetimeofeachsegmentcan’tbeoverlapped.Upto4segmentscan
beconfigured.
(2) SelectaRecordType.TherecordtypecanbeNormal,MotionDetection,
Alarm,Motion|Alarm,Motion&Alarm.
 Normal
Ifyouselect Normal,the videowillberecordedautomaticallyaccordingto
thetimeoftheschedule.
 RecordTriggeredbyMotionDetection
If you select Motion Detection, the video will be recorded when the
motionisdetected.
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of Trigger Channel in the Linkage
Method of Motion Detection Settings interface. For detailed information,
please refer to the Step 1 Set the Motion Detection Area in the Section