User manual

UserManualofIRNetworkSpeedDome
64
YoucanfollowbelowconfigurationinstructionstouploadthesnapshotstoFTP.
 UploadcontinuoussnapshotstoFTP
Steps:
1) Configure the FTP settings and check  checkbox in FTP
Settingsinterface.PleaserefertoSection6.3.8ConfiguringFTPSettingsformore
detailstoconfigureFTPparameters.
2) ChecktheEnableTimingSnapshotcheckbox.
 UploadeventtriggeredsnapshotstoFTP
Steps:
1) Configure the FTP settings and check
 checkbox in FTP
Settingsinterface.PleaserefertoSection6.3.8ConfiguringFTPSettingsformore
detailstoconfigureFTPparameters.
2) Check
checkboxin Motion Detection SettingsorAlarmInput
interface. Please refer to Step 3 Set the Alarm Actions Taken for Motion 
Detectionin Section 6.6.1 Configuring Motion Detection,orStep 4 Configuring
ExternalAlarmInputinSection6.6.1ConfiguringMotionDetection.
3) ChecktheEnableEventtriggeredSnapshotcheckbox.

Figure647 SnapshotSettings
