User manual

UserManualofIRNetworkSpeedDome
59
(NormallyOpen)andNC(NormallyClosed).
3. Edit the name in  to set a
nameforthealarminput(optional).

Figure642 AlarmInputSettings

4. Click  tosetthearmingscheduleforthealarminput.RefertoStep2
Set the Arming Schedule for Motion Detection in Section 6.6.1 Configuring
MotionDetection.
5. Checkthecheckboxtoselectthelinkagemethodtakenforthealarminput.Refer
to Step 3 Set the Alarm Actions for Motion Detection in Section 6.6.1 
ConfiguringMotionDetection.
6. You can also choose the PTZ linking for the alarm input. Check the relative
checkbox and select the No. to enable Preset Calling,  Patrol Calling or Pattern
Calling.
7. Youcancopyyoursettingstootheralarminputs.
8. Click  tosavethesettings.