User manual

UserManualofIRNetworkSpeedDome
53
6. Click  toactivateabovesettings.
6.5.3 ConfiguringTextOverlaySettings
Purpose:
Youcancustomizethetextoverlay.
Steps:
1. EntertheTextOverlaySettingsinterface:
Configuration>AdvancedConfiguration>Image>TextOverlay
2. Checkthecheckboxinfrontoftextboxtoenabletheonscreendisplay.
3. Inputthecharactersinthetextbox.
4. Use the mouse to click and drag the  red text frame  in the live view
windowtoadjustthetextoverlayposition.
5. Click .
Note:Thereareupto4textoverlaysconfigurable.

Figure636 TextOverlaySettings

6.6 ConfiguringandHandlingAlarms
Purpose:
Thissectionexplainshowtoconfigurethenetworkspeeddometorespondtoalarm
events, including motion detection, external alarm input, tamperproof and 