User manual

User Manual of Network Camera

3. Click Save to save the settings.

Note: If you want to upload the captured pictures to FTP server, you have to

enable the continuous snapshot or event-triggered snapshot on Snapshot page.

For detailed information, please refer to the Section 6.6.7.

6.4 Configuring Video and Audio Settings

6.4.1 Configuring Video Settings

Steps:

1. Enter the Video Settings interface:

Configuration >Basic Configuration > Video / Audio > Video

Or Configuration > Advanced Configuration > Video / Audio > Video

Figure 6-22 Configure Video Settings

2. Select the Stream Type of the camera to main stream (normal), sub-stream or third

stream.

The main stream is usually for recording and live viewing with good bandwidth,

and the sub-stream and third stream can be used for live viewing when the

bandwidth is limited.