User manual
User Manual of Network Camera 
48 
Figure 6-18 Email Settings 
3.  Configure the following settings: 
Sender: The name of the email sender. 
Sender’s Address: The email address of the sender. 
SMTP Server: The SMTP Server IP address or host name (e.g., 
smtp.263xmail.com). 
SMTP Port: The SMTP port. The default TCP/IP port for SMTP is 25 (not 
secured). And the SSL SMTP port is 465. 
Enable SSL: Check the checkbox to enable SSL if it is required by the SMTP 
server. 
Attached Image: Check the checkbox of Attached Image if you want to send 
emails with attached alarm images. 
Interval: The interval refers to the time between two actions of sending attached 
pictures. 
Authentication (optional): If your email server requires authentication, check 










