User manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Wi-Fi Settings
- Chapter 5 Live View
- Chapter 6 Network Camera Configuration
- 6.1 Configuring Local Parameters
- 6.2 Configuring Time Settings
- 6.3 Configuring Network Settings
- 6.4 Configuring Video and Audio Settings
- 6.5 Configuring Image Parameters
- 6.6 Configuring and Handling Alarms
- 6.6.1 Configuring Motion Detection
- 6.6.2 Configuring Tamper-proof Alarm
- 6.6.3 Configuring External Alarm Input
- 6.6.4 Configuring Alarm Output
- 6.6.5 Handling Exception
- 6.6.6 Email Sending Triggered by Alarm
- 6.6.7 Configuring Snapshot Settings
- 6.6.8 Face Detection
- 6.6.9 Configuring Other Alarms
- 6.6.10 Arming or Disarming the Camera
- Chapter 7 Storage Settings
- Chapter 8 Playback
- Chapter 9 Log Searching
- Chapter 10 Others
- Appendix
User Manual of Network Camera
67
Remote Control:
Figure 6-36 Remote Control
Remote Control Description:
Status Indicator
Indicating the status of the remote; when
you press the button on the remote, the
indicator flicks in red.
Arm
Press the button to arm the camera. In
arming status, the alarm function, such
as the wireless alarm and the PIR alarm,
is enabled.
Disarm
Press the button to disarm the camera. In
the disarming status, the alarm linkage is
disabled.
Emergency Button
Press the button to trigger the
emergency alarm. The emergency alarm
has the highest priority.
Stream Sending Switch
Switch for the video stream transmitting.
Press the button to stop or start video
stream sending. When the video stream
is stopped, you can’t see the live view or
get the record stream on the remote
client or browser.