User manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Wi-Fi Settings
- Chapter 5 Live View
- Chapter 6 Network Camera Configuration
- 6.1 Configuring Local Parameters
- 6.2 Configuring Time Settings
- 6.3 Configuring Network Settings
- 6.4 Configuring Video and Audio Settings
- 6.5 Configuring Image Parameters
- 6.6 Configuring and Handling Alarms
- 6.6.1 Configuring Motion Detection
- 6.6.2 Configuring Tamper-proof Alarm
- 6.6.3 Configuring External Alarm Input
- 6.6.4 Configuring Alarm Output
- 6.6.5 Handling Exception
- 6.6.6 Email Sending Triggered by Alarm
- 6.6.7 Configuring Snapshot Settings
- 6.6.8 Face Detection
- 6.6.9 Configuring Other Alarms
- 6.6.10 Arming or Disarming the Camera
- Chapter 7 Storage Settings
- Chapter 8 Playback
- Chapter 9 Log Searching
- Chapter 10 Others
- Appendix
User Manual of Network Camera
56
Figure 6-25 Arming Time
(1) Click to edit the arming schedule. The Figure 5-28 shows the
editing interface of the arming schedule.
(2) Choose the day you want to set the arming schedule.
(3) Click to set the time period for the arming schedule.
(4) After you set the arming schedule, you can copy the schedule to other days
(Optional).
(5) Click to save the settings.
Note: The time of each period can’t be overlapped. Up to 4 periods can be
configured for each day.
Figure 6-26 Arming Time Schedule
3. Set the Alarm Actions for Motion Detection.
Purpose: