User manual

User Manual of Network Camera

Figure 6-12 SNMP Settings

2. Check the corresponding version checkbox ( ,

, ) to enable the feature.

3. Configure the SNMP settings.

Note: The settings of the SNMP software should be the same as the settings you

configure here.

4. Click to save and finish the settings.

Note: it will ask for a reboot for the settings to take effect.

6.3.6 Configuring 802.1X Settings

Purpose:

The IEEE 802.1X standard is supported by the network cameras, and when the

feature is enabled, the camera data is secured and user authentication is needed

when connecting the camera to the network protected by the IEEE 802.1X.

Before you start:

The authentication server must be configured. Please apply and register a user name

and password for 802.1X in the server.

Steps:

1. Enter the 802.1X Settings interface: