User Guide

Installation Guide

SC300P - Passenger Side

Dodge Ram 2002 - Current

For Warranty Issues, Contact UnderCover Directly

(866) 900-8800 www.undercoverinfo.com

Form # SC300PII

Modied Aug 2015

Hardware Included

1. Truck Bracket

2. Striker Bracket

3. Mounting Screws (qty 6)

4. Assembly Nuts (qty 2)

1. BRACKET ASSEMBLY - Attach the striker bracket to

the truck bracket using the two (2) assembly nuts.

2. INSTALLING MOUNTING BRACKET ASSEMBLY - Position the bracket to the light well/wheel well area. It

is not necessary to remove the tie down on 2009 - Current Ram trucks.

(Note: 2002-2008 Dodge Ram - Must remove tie down on this model)

Line the top hole in the bracket with the dimple in the lightwell indicated on the inset drawing. Using

the six (6) self drilling screws provided, attach the bracket to the truck . Be careful not to overtighten and

strip out the holes.

SC300P

PAGE 1
Installation Guide P SC300P SC300P - Passenger Side Dodge Ram 2002 - Current 1 1 2 3 Hardware Included 1. Truck Bracket 2. Striker Bracket 3. Mounting Screws (qty 6) 4. Assembly Nuts (qty 2) 4 1. BRACKET ASSEMBLY - Attach the striker bracket to the truck bracket using the two (2) assembly nuts. 2 2. INSTALLING MOUNTING BRACKET ASSEMBLY - Position the bracket to the light well/wheel well area. It is not necessary to remove the tie down on 2009 - Current Ram trucks.
PAGE 2
Installation Guide - Continued 3 4 3. INSTALLING SWING CASE Lower the box onto the hinge pins and gently push the box to the stowed position. 4. OPERATION AND ADJUSTMENT Pull the latch rod and swing through the full motion making sure it operates freely and latches easily. Do not slam the box to stow it, if it will not latch easily it may be necessary to make some minor adjustments. The latch has slotted holes, just loosen the two bolts and adjust as needed.