User Manual

ManualsBrandsUndercover ManualsAutomotiveUnderCover SwingCase Truck Storage Box | SC201D | fits 1999-2014 Ford F-150 Drivers Side

Thank you for purchasing the

UnderCover Swing Case!

• Read instructions completely before

installing your Swing Case to your truck.

• The Swing Case is designed for trucks that do not have a bedliner (spray in bedliners pose no problem). Trucks that do have

plastic drop in bedliners or Bed Rugs will require some trimming of the liner to ensure proper  t of the brackets. We provide

some guidelines for installing with liners, however due to the wide variety of liner manufacturers, the modi cations will vary.

Any modi cations must be made to the liner and NOT to the Swing Case mounting hardware. Modi cations to the mounting

hardware could result in improper installation and will void your warranty.

• The Swing Case is left and right speci c. They will not interchange.

• The Swing Case will not work with bed extenders.

• Upon opening the Swing Case lid there could be an odor of glue. This is a non toxic adhesive that we use during the

assembly of the box. The odor will go away as the lid is opened and closed a few times.

PRODUCT INSTALLATION GUIDE

SC101 - SC200 -SC201 -SC300 -SC400

FORM# SC6004II

Modi ed Jan 2009

Summary of content (4 pages)

PAGE 1
FORM# SC6004II Modified Jan 2009 PRODUCT INSTALLATION GUIDE SC101 - SC200 -SC201 -SC300 -SC400 Thank you for purchasing the UnderCover Swing Case! • Read instructions completely before installing your Swing Case to your truck. • The Swing Case is designed for trucks that do not have a bedliner (spray in bedliners pose no problem). Trucks that do have plastic drop in bedliners or Bed Rugs will require some trimming of the liner to ensure proper fit of the brackets.
PAGE 2
For Trucks with Plastic Bed Liners: See Addendum A For Trucks with Bed Rugs: See Addendum B • INSTALLING MOUNTING BRACKET Remove the brackets from inside the box, unwrap and position the bracket to the light well/wheel well area. On some trucks it may be necessary to remove the tie down. Place the bracket in position, make sure the bottom of the bracket is flush or as close as possible to the floor. – Picture 1 and 2. • INSTALLING MOUNTING BRACKET (continued) Using the self drilling screws provided.
PAGE 3
If your Truck has a Plastic Bed Liner: See Addendum A If your Truck has a Bed Rug: See Addendum B • FOR TRUCKS WITH PLASTIC BED LINERS For trucks with plastic bed liners it will be necessary to trim the liner. DO NOT INSTALL THE BRACKETS ON TOP OF THE BEDLINER. The brackets will not fit over the plastic bedliner, the brackets must be attached directly to the sheet metal. Hold the brackets up against the bedliner in their approximate location.
PAGE 4
Terms of this Warranty. E. D. Industries, Inc. warrants that the ABS polymer structure of your Swing Case will be structurally free from defects in material and workmanship for (1) one year from the retail date of purchase. The lock, hinges, and hardware are warranted to be free from defects in material and workmanship for (1) one year from the retail date of purchase. This warranty applies only to the original purchaser and is nontransferable.