Installation Manual

Installation Guide
SC201D - Drivers Side
Ford F150 1997 - 2014
For Warranty Issues, Contact UnderCover Directly
[phone] www.undercoverinfo.com
Form # SC201DII
Modied Jan 2015
Hardware Included
1. Truck Bracket
2. Striker Bracket
3. Mounting Screws (qty 6)
4. Assembly Nuts (qty 2)
Hardware Included
1. Truck Bracket
2. Striker Bracket
3. Mounting Screws (qty 6)
4. Assembly Nuts (qty 2)
NOTE: Use the two holes to the left of the stricker
on 2004 - 2014 F150 6.5’ bed
1
2
3
4
1
2
3
1. BRACKET ASSEMBLY - Attach the striker bracket to the truck bracket using the two (2) assembly nuts.
2. INSTALLING MOUNTING BRACKET ASSEMBLY - Remove the factory ford tie down (T30 bit), turn upside
down and reinstall. Position the bracket to the light well/wheel well area.
3. INSTALLING MOUNTING BRACKET ASSEMBLY (continued)
Mount the bracket ush to the bed oor, according to the drawing.
Using the six (6) self drilling screws provided, attach the bracket to the
truck . (The two holes to the left of the latch are to be used only on the
2004-2014 F150 6.5’ bed.) Be careful not to overtighten and strip out the
holes.
D
SC201D