User Manual
7. Slide four (4) M8 t nuts into each tango side rail track. Using the M8 bolts, at washers and lock washers
attach the front brackets and the striker brackets according to the measurements below.
8. Position the front mounting brackets 3 1/8” from the plastic corner piece of the Tango Track. Position the
rear striker brackets 2 3/8” from the rear of the extrusion.
© 2016 UnderCover, Inc.
All rights reserved.
UnderCover, Inc.
(866) 900-8800
www.undercoverinfo.com
Page 4
Ridgelander Bracket Installation
3 1/8”
2 3/8”