User Manual

www.UncagedErgonomics.com
OPERATING INSTRUCTIONS:
ships fully assembled & requires no installation. is an adjustable-height platform designed to hold laptops, single & dual monitors, and other
similar devices at a comfortable height for sitting or standing at a desk. The max load is 25 lbs.
IMPORTANT: BEFORE placing a computer, monitor, or other device on , practice adjusting ‘s height.
IMPORTANT: Before using your :
Read and clearly understand the contents of this manual
Understand how to adjust correctly
Practice adjusting with nothing on it.
Have Questions? Need Help?
Ou
r A+ customer support team is here to help:
EMAIL: [e-mail]
PHONE: [phone]
1. Place
on top of any level desk,
table, or counter.
2. To Adjust The Height:
a. Use both hands to grasp the top panel.
b. Squeeze the adjustment lever with your right hand.
c. Raise or lower the top panel to your desired height
d. Release the adjustment lever.
e. Ensure that the top panel is locked in place.
f. Release your grasp on the top panel.
WARNING! Only adjust when nothing is on the bottom shelf.
WARNING! PINCH POINT!: Do not place fingers or extremities near or inside
the “X-shaped” joints.
DANGER! PINCH POINT!: Do not let fingers or extremities cross the vertical
plane created by the X-shaped joints.
TIPS:
1. The top panel is smooth and ideal for writing.
2. adjusts to 4 height settings from ~ 3 – 14”.
3. The spring-assisted height adjustment is fast, smooth & safe.
COMMON USES:
- Adjustable-Height Monitor Stand:
Conveniently elevate monitors to eye-level when sitting
- Simple Laptop Standing Desk:
Stand up and work on your laptop anywhere!
3. Quickly Height-Adjustable
Once familiar with the lever
locking system, you can
quickly adjust the height of
your device in seconds!