Model #: XMB2013 - STAND Item #:1004102921 :1004102920 :1004088901 Fergus Chevron Slat Bed - Full/Queen/King Questions, problems, missing parts? Before returning to the store, call Customer Service. 8 a.m. –7 p.m., EST, Monday –Friday, 9 a.m. –6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Stylewell through the purchase of this Fergus Chevron Slat Bed - Full/Queen/King.
Table of Contents Table of Contents .............................................................. 2 Safety Information .............................................................. 3 Warranty.............................................................................. 4 What is Covered.................................................... 4 What is n ot Covered............................................ 4 Pre-Assembly.............................................................. 4 Planning Assembly.......
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-877-527-0313, 8 a.m. –7 p.m., EST, Monday –Friday, 9 a.m. –6 p.m., EST, Saturday □ Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
Warranty 1 YEAR WARRANTY WHAT IS COVERED We guarantee this product to be free of manufacturing defects to the original purchaser for one year. WHAT IS NOT COVERED This warranty does not cover commercial use, acts of nature, and abusive use. Pre-Assembly Planning Assembly □ □ □ □ Remove all packaging materials, staples and packing straps from the carton. Refer to Parts List and Hardware List, and ensure parts and hardware are correct before assembly. Contact customer service for missing parts.
Pre-Assembly (cont.
Assembly 1.Place footboard left leg (G) and right legs (F) with the 4 holes facing up as shown and insert wood dowel (GG) into the middle two holes. F G 2.Take out the left sideboard (H) and right sideboard (I) and insert wood dowel (GG) into the side two holes as shown photos.
Assembly (Cont.) 3.Assemble legs to headboard. Take out the headboard(A),headboard left leg(B),headboard right leg(C) and put the headboard(A) exterior side facing up as shown. Fasten leg(B) and leg(C) to headboard (A) with screw(AA) fitted with washer (BB).Use allen key(CC) to drive(AA). 4.Turn assembled headboard over,fasten the headboard support bar(D) to the 2 holes in leg(B and C) with screw(DD) fitted with washer(BB).Use allen key(CC) to drive(DD).
Assembly (Cont.) 5.Assemble legs (F and G) to footboard (E). Place footboard(E) with the interior side facing up as shown. Attach leg (F) and leg (G) from step 1 to footboard (E) via wood dowels, and fasten with screw (AA) fitted with washer (BB). Use allen key (CC) to drive (AA). 6.Fasten metal leg (L×3) to center support (K) with screw(DD) fitted with flat washer (BB) .use allen key (CC) to drive (DD) .
Assembly (Cont.) 7.Assemble sideboard (H and I) to footboard (E) Position footboard (E) vertically. Attach sideboard (H and I) to footboard (E) by fitting the bracket hooks on (H and I) into the bracket slots on footboard (E) . 8.Assembly bed frame from step 7 to the headboard from step 4. Insert the screw (FF) to the 2 holes on sideboard(H and I) . Fasten the sideboard (H and I) to the headboard legs (B and C) with screw (EE) . Use allen key (CC) to drive (EE).
Assembly (Cont.) 9.Attach cent support (K) to footboard (E) and headboard support bar (D) with screws (HH) fitted with washer (BB) by allen key (CC).
Assembly (Cont.) 10.Lay the 2 sets of slat (J) to fit on the rail on the sideboards. Check and ensure that the designated slat on each set is firmly affixed to the raill on the sideboard. Remove adhesive covering from the 2 pieces of slate. The assembly of the bed platform is complete.
Maintenance □ □ □ □ Keep the product away from direct heat and sunlight. Prolonged exposure to heat sources may cause scorching, or even cause color to fade. Regular vacuuming or light brushing helps to remove dirt and prevent soil build-up, which increases the appearance wear. Periodically (every 90 days) make sure that the screws are fully tightened. Care and Cleaning □ □ □ □ □ □ □ □ □ Handle with care. Use a slightly damp cloth to clean the product. Do not use bleach or use abrasive cleaning material.
Questions, problems, missing parts? Before returning to the store, call Customer Service. 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.
