Product Literature

Micro-Irrigation
2" & 3" Plastic Disc Filters
Application:
• Designed for use as a primary or secondary filter
• Can be installed upright or downward
• For use with water containing high amounts of organic or
inorganic matter
Disc Characteristics:
• The specially designed two-sided disc ring features:
– On one side, a sinusoidal ( ) disc pattern
– And on the other side, grooves in concentric ( )circles
• Both sides working together gives a surface area that is
unachievable by any other standard disc ring. This results
in longer periods between cleanings, less filter maintenance
and prolonged product life.
• Available in 50, 85, 120, 150, and 200 mesh.
Features Benefits
Body constructed of glass
reinforced Nylon.
Provides durability/reliability that will
extend product life.
Two downstream exit ports.
Filter can be installed in a angle or
globe configuration, reducing the
need to re-do piping.
Specially designed disc rings.
(XD Models)
Provides greater surface area
resulting in a longer time between
cleanings, less filter maintenance and
extended product life.
O-ring between cover and body. Prevents leakage.
Easy to tighten Ring-Nut. Saves time and provides a tight seal.
Pre-molded threaded holes for
pressure gauges.
Location to install pressure gauges to
read up and downstream pressures.
Disc Filtration Flow
XD Disc Rings
Disc Characteristics:
• Narrowing, cross-hatched grooves trap particles and debris
between and on the outside of the disc rings:
– Each side of the standard disc ring has opposite running
tapered grooves, thereby creating an interweaving labyrinth
among the discs.
• The standard disc rings press together and utilize the cross-
hatched groove design, allowing only clean water to flow through.
• Available in 120 and 150 mesh.
SD Disc Rings