Use and Care Manual

Page 7 of 10
fix the brackets to the wall. The installed wall brackets ‘A’ and ‘B’ must be fixed to
withstand a minimum pressure of 68 kg (150 lbs) vertically and horizontally along the wall
plane.
2. Unit Installation
a. With the help of a second person,
hang the unit by lining up the hooks
on the horizontal bracket ‘A’ with the
square holes ‘C’ on the back of the
unit. Make sure the bottom of the
unit is sitting on the bottom edge of
the vertical brackets ‘B’ brackets.
b. Lock the unit into position by using
the black screws and washers included
with your unit. Screw the lock screws
through the washers, through the holes
on the bottom ledge of the vertical
brackets and into the unit itself.
3. Glass Holding Brackets
a. Place the glass holding brackets ‘D’ into
position.
b. Fix them into place using a washer, the
socket cap recessed hex screws ‘E’ and
the Allen key included with the unit. The
glass holding brackets can be adjusted
to ensure the glass sits perfectly vertical.
4. Burner Installation
a. Place the burner rack into position.
(Some models already have the burner
rack in position)