Installation Guide
ASSEMBLY INSTRUCTIONS
Figure 1.1
B.
Attach brine well bracket (1) to brine tank by sliding bracket over brine well, as shown in Figure 1.1.
C.
Remove nut from threaded end of brine well bracket.
D.
Insert bracket into top hole of brine tank (2). Replace nut on bracket outside of hole in tank.
E.
Insert the PVC tube bushing (from Parts Bag B) completely into the end of the brine tube as shown below.
10
F.
Feed PVC tubing (3) through the bracket, as shown in Figure 1.1.
G.
Remove connecting nut from brine valve. Slide the brine valve nut (4) on to the PVC tubing.
Push tubing all the way into the brine valve and secure nut.
H.
Push the brine valve (5) to the bottom ofthe brine well. Be sure not to loosen or kink PVC tubing.
I.
Replace brine well cap.