Use and Care Manual

9. Attach front screen mesh panel to front top section of heater. Install before installing top
back panel. Place hot symbol logo with 10/32 x ½” bolts onto open holes in middle of
panel while securing mesh panel . Next place mesh over bolts and secure using k nuts.
Finish by placing 10/32 bolts into remaining holes and secure with k-nuts.
11. Attach partially assembled top section of cage to heater attaching at middle baffle pan
using ¼-20x1/2” bolts.
12. Attach Spring handle to the door. Twist in a clockwise direction to attach.
13. Install stove pipe and spark arrestor.. Install stove pipe by sliding through middle baffle pan
and onto the stove collar. Next attach spark arrestor.
14. Install rear back top panel using (x8) 10/32x1/2” bolts
For any questions please email us at :
[e-mail] or call 1-877-347-2848