Data Sheet
4
Rev. 3/20
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual Products offered
for sale may vary in use, design, requirements and safety features. Consult your local Toro Distributor. “Cushman” is a registered trademark of Ransomes.
The Workman HD utility vehicle is manufactured
in Tomah, WI ISO 9002 Certified Plant.
Workman
®
HD Series Specifications
*
(continued)
WORKMAN VEHICLE ACCESSORIES
HIGH FLOW HYDRAULICS KIT
Provides 8 gpm (30.3 liter) at 2000 psi hydraulic flow in a separate circuit to power certain attachments and accessories (standard on TC models).
Note: Model 07369 cannot run High Flow Hydraulics Kit.
200 GALLON SPRAYER
200 gallon (757 liter) low profile tank sprayer with diaphragm pump and detatchable control box. Three-section, 18.5 ft (5.6 m) open boom system.
VICON SPREADER
Pendulum action spreader with polyester hopper. 14.1 cu. ft. (.396 cu. m), 750 lbs (340.5 kg) capacity. Spread width is 3 - 46 ft. (1 - 14 m).
TOPDRESSER 1800
18 cu. ft. (.504 cu. m), 1450 lbs (541 kg) capacity conveyor belt style topdresser hydraulically driven by remote hydraulics. 60 in (152 cm) spread width.
Workman bed lift cylinders raise topdresser. Spring load metering gate.
TOPDRESSER 2500
25 cu. ft. (.7 cu. m) capacity conveyor belt style topdresser towed by Workman vehicle. Textured belt, oscillating axles and all wheel drive.
Electrically activated hydraulic brakes.
PROPASS
TM
200 TOPDRESSER
21 cu. ft. / 0.54 cu. m) struck (25 cu. ft. / 0.71 cu. mheaped) capacity spin style topdresser. Tow-behind or bed mount versions.
PRO FORCE® DEBRIS BLOWER
Tow-behind, self-contained engine-driven debris blower operated with a hand-held wireless RF controller. Bed mount kit available.
HARD CAB
Deluxe hard cab, ROPS and CE certified. Vented front glass windshield, interior dome light and a 2-speed windshield wiper. Optional heater and mirrors available.
CAB SLIDING WINDOW DOOR
KIT
Door kit for deluxe hard cab. Operator door has a sliding window for ventilation and ability to access exterior elements such as an identification badge security entry.
Passenger door has solid window.
CAB REAR VIEW MIRROR KIT
Externally mounted to the cab frame, operator and passenger side rear view mirrors for enhancing all around visibility.
CANOPY
Durable, high-density polyethylene canopy with drainage outlets for moisture runoff.
FOLDING WINDSHIELD
Clear high-impact modified acrylic material with fold down capability.
BRAKE & SIGNAL KIT
Consists of turn signal lights for both corners in the front and rear of vehicle and brighter beam headlights.
WORK LIGHT KIT
Consists of (2) front facing and (1) rear facing work lights all mounted on top of ROPS bar.
ROPS SIGNAL LIGHT KIT
Consists of (2) double amber warning lights and (2) single red tail lights all for mounting on top of ROPS bar. Requires either a “Right Side” or “Left Side” light kit.
REAR PTO KIT
Rear mounted, 540 RPM, PTO shaft mechanically driven by transaxle.
HAND THROTTLE
Throttle and speed limit control that provides constant RPM for stationary attachments or a controlled maximum speed for applications such as spraying or spreading
(mechanical – HDX/HD & electric – HDX gas models).
SPARK ARRESTOR
Fits onto end of tailpipe.
PLASTIC BED LINER
A rugged, weatherproof one-piece plastic liner and separate tailgate liner that will protect either a full are bed with sides or a 2/3 bed with sides.
HIGH AIR INTAKE KIT
Kit for extending the air intake system from underneath the cargo bed to a position slightly above the ROPS shield behind the passenger position of the vehicle.
Recommended for dusty work applications.
REAR VIEW MIRROR KIT
A single 8 1/2” (21.6 cm) convex mirror with mounting capability on either the operator or passenger side of the vehicle.
2” RECEIVER HITCH KIT
Provides a 2” square receiver to enable a “drawbar” hitch.
TRAILER BRAKE WIRING KIT
Kit provides a controller which plugs into Workman vehicle and a positive wire to assist the hook up of customer supplied electric trailer brakes.
TRAILER SIGNAL WIRING KIT
Kit provides electrical wire for Workman vehicle to enable easy hook up to customer supplied trailer signal and brake lights.
REMOTE HYDRAULIC MANIFOLD KIT
Hydraulic manifold kit that provides to ability to switch hydraulics between cargo bed actuation and remote port usage via use of a operator panel mounted switch.
REMOTE HYDRAULIC FLOAT KIT
Hydraulic float kit that enables both hydraulic lifting and “float” in the down position. Required when using a Deere TC125 sweeper.
4WD MANUAL CONTROL
Allows auto 4WD to be turned off.
4 POST ROPS CANOPY KIT
Canopy for use with 4-post ROPS kit.
4 POST ROPS KIT
Connects standard 2-post ROPS to 4-post ROPS. Required with 200-gallon sprayer.
HEATER KIT
Heater for use with cab. Adjustable temperature and 2-speed fan (excludes HD).
BACK UP ALARM KIT
Provides an audible alarm when vehicle is in reverse.
BOSS® SNOW ACCESSORIES
5' (1.52 m) BOSS Plow, VBX3000 Box Spreader.