Use and Care Manual

- 22 -
5) Attach the insulated ducts to the hoods with adhesive tapes.
6) Secure the ducts with conduits to the wine cellar ceiling and exterior walls and
make sure they are not curled, twisted, bent and clogged.
7) Install an air filter at the rear of the cooling unit.
8) Plug the unit into a properly grounded and dedicated outlet of adequate
capacity.
9) Turn on the high condenser fan switch.
10) Turn the evaporator fan control knob counter-clockwise to achieve the
required air flow CFM.
Fig. 4.14 Cold-air supply, cellar-air return, hot-air exhaust and ambient-air
intake ducts