Warranty

1. LIMITED WARRANTY
Manufacturer warrants Powerblanket Products sold as “new” to be free from defects in material
and workmanship for a period of one (1) year from the date of purchase by a retail customer when
used, stored, inspected and serviced as specified in any operating instructions provided with the
Powerblanket Product. Exclusions from warranty consideration include, but are not limited to:
normal wear and tear; abuse, misuse, or non-standard application; act of nature; lack of proper
maintenance; improper care or storage (blankets should be folded and not rolled up);
unauthorized repair; unauthorized modification; or attachment to another product, use with any
attachment or as integrated into another product. Neither Manufacturer, nor its representatives,
assumes any responsibility for any other products used with the Powerblanket Product or for
results of or damages caused to persons or property by the use of the Powerblanket Product.
Only the Manufacturer is authorized to make any warranty or representation and the customer
may not rely on any other warranty or representation. All implied warranties are hereby
disclaimed.
MANUFACTURER MAKES NO OTHER WARRANTY OR REPRESENTATION OF ANY KIND,
EXPRESSED OR IMPLIED, IN FACT OR IN LAW, INCLUDING WITHOUT LIMITATION ANY
WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE OR USE OTHER THAN THE LIMITED WARRANTY SET FORTH
ABOVE.
2. LIMITATION OF LIABILITY
MANUFACTURER’S SOLE LIABILITY SHALL BE AS SET FORTH HEREIN, AND SHALL
EXTEND ONLY TO INSPECTION, REPLACEMENT OR REPAIR OF THE POWERBLANKET
PRODUCT, AT THE DISCRETION OF MANUFACTURER, WITHIN THE TIME PERIOD AND ON
THE TERMS SET FORTH HEREIN. MANUFACTURER HAS NO LIABILITY FOR ANY OTHER
PRODUCTS USED WITH, ATTACHED TO OR WITH WHICH THE POWERBLANKET
PRODUCT MAY BE INTEGRATED INTO, OR FROM THE RESULTS OF SUCH USE,
ATTACHMENT OR INTEGRATION. IN NO EVENT WILL MANUFACTURER BE LIABLE FOR
SPECIAL, INCIDENTAL, INDIRECT, PUNITIVE OR CONSEQUENTIAL DAMAGES. IN NO
EVENT SHALL MANUFACTURER’S LIABILITY EXCEED THE PAYMENTS RECEIVED BY
MANUFACTURER FOR THE POWERBLANKET PRODUCT.
3. RETURNS
a. When any Powerblanket Product has been authorized to return for any inspection, or
replacement, it must be returned as specified in the Return Merchandise Authorization Form.
b. A Manufacturer-issued Returned Material Authorization (RMA) number authorizing a product
return must be acquired prior to sending any return. In addition, documentation of model, product
serial number, dealer invoice number, dated proof of resale, and description of failure shall
accompany all returns.
c. All returns must come freight prepaid and in their original containers, or in a manner conducive
to proper shipping and handling procedures. Product(s) replaced, or shipped in accordance with
the Return Merchandise Authorization Form will be returned freight prepaid.
d. Manufacturer reserves the right to postpone, delay, or refuse warranty claim consideration for
either unauthorized returns or returns made by dealers or distributors whose open and active
accounts are past due or delinquent. The dealer or distributor agrees that no warranties or other
guarantees on any products shall be made in excess of those made by Manufacturer. This
agreement excludes Manufacturer or its representatives from all liability not covered in this
Warranty.