User manual

Page 31
877-877-2269 | blackbox.com/Coalesce
Appendix B: Coalesce Network Setup
Table B-2. Coalesce network operation modes.
Mode Description
Wireless Access Point
Deployed as a standalone WAP to support wireless peer-to-peer traffic. Configurable SSID
and security settings. Ethernet adapter is configured separately and can be enabled or
disabled when the WAP is enabled (see final option below).
Wired Ethernet Client
Connected to existing network via Ethernet connection. Supports either DHCP or static IP
configurations. The wireless antenna is configured separately and can be enabled or
disabled when the Ethernet adapter is in use (see final option below).
Wireless WiFi Client
Connected to existing network via wireless antenna. Supports either DHCP or static IP
address configurations. This mode is only recommended when no Ethernet connection is
available. Ethernet adapter is configured separately and can be enabled or disabled (see
final option below).
WiFi + Wired
Connected to an existing network via Ethernet connection. The Coalesce’s WAP is also
enabled OR wirelessly connect to an additional existing network. Supports enterprise net-
work users and guest (network) users. Internet access for WAP-connected users can be
optionally enabled by opening ports 80 and 443.
NOTE: For more detailed information and instructions about Coalesce network deployment, refer to the Coalesce Network
Deployment Guide.