Use and Care Manual

USE & CARE MANUAL
SHOAL CREEK VITEX
(Vitex Agnus Castus)
PLANTING GUIDE:
STEP 1) First, decide on a planting location. Consider carefully what kind of sun, soil, and growing-space
your tree or shrub will need.
STEP 2) Once you've located the perfect spot, the hole you are digging must be at least double the width
and as deep as the root system you are planting.
STEP 3) The top of the root system should be level with the ground. Before placing the tree or shrub in
the hole, use your hands to gently break up the root system.
STEP 4) Once the tree is in place, backfill the hole with native soil and any leftover potting material.
STEP 5) Pack down the soil to eliminate any air pockets.
STEP 6) When finished, water thoroughly.
PLANTING CARE:
Plant your vitex in full sun and in well-drained soil. If you are planting in a container, it should be at least
32 inches deep and wide. If planting outside, create a 2 inch layer of mulch around the base after
planting. Water once a week for the first growing season. Fertilize your vitex in the spring. Prune to
encourage more blooming.