Use and Care Manual
6
Steam and detergent injection :
• Empty the tank (11) of water
• Fill the detergent tank (11) with a mix detergent specified by the manufacturer
(97% of water + 3% of detergent)
and ensure that the connection tube (18) is correctly fitted.
• Start the machine as above.
• Press the red button (17) on the handgrip .
CAUTION
This machine has been designed for use with non-foaming and non-corrosive detergent. Use of
foaming and/or corrosive detergent could damage the machine! You are advised to use only
the detergent specified by the manufacturer.
Dust – liquid vacuum cleaning function : (only SP35 A)
• Connect the steam + suction
handgrip to the steam socket 4
• Press the switch (20)
• Press the switch (3).
• Vacuum function start.
Cleaning information :
To have a best result of cleaning, use the follow system:
1. Melt the dirty with the steam/detergent function.
2. Vacuum the dirty
CAUTION
This machine is not suitable for collecting dangerous dust!
Water refill
:
When the water in the boiler finishes, the machine emits an acoustic signal and the no water
warning light 6 ( intermittent lamp and sound signal). The steam outlet is blocked.
Perform the following operations:
• Fill the water tank (10) and ensure that the connection tube (19) is correctly fitted.
• Press the switch (17) to restore the cleaning system.
As the boiler is already under pressure, pilot light 7 comes on after a few seconds and the machine
is ready to resume work.
20
4
11
10
13
9
6
1
2
7
5
4
14
8
12
3
Cleaning System details
1. Main switch with light
2. Boiler switch with light
3. Vacuum switch ( only VC 6000 FULL)
4. Socket
5. Pressure gauge (optional)
6. No water warning light
7. Work enable pilot light
8. Safety cap with water level sensor
9. Steam adjustment
10. Water tank
11. Detergent tank
12. Detergent adjustment ( Only VC 6000 FULL)
13. Power cord
14. Cleaning boiler cap
15. Steam switch
16. Water switch
17. Red switch
18. Detergent connection tubes
19. Water connection tu
bes
20. Vacuum switch
21. Electrical sensor
22. “O” ring safety cup
Steam hose (1)
Steam/Vac hose (18)
Vacuum Handle (33)
VC 6000
VC 6000 FULL
17
15
1
7
16
7
ACCESSORIES
Steam kit (VC 6000):
1 STEAM HOSE 3.3 m with handle and plug
2 EXTENSION (2)
3 FLOOR BRUSH
4 GLASS CLEANER
5 TRIANGULAR BRUSH
6 STEAM NOZZLE MEDIUM L=250
7 STEAM NOZZLE LONG L=350 (Optional)
8 STEAM NOZZLE SHORT L=100 (Optional)
9 STEAM NOZZLE PLASTIC 1 HOLE
10 STEAM NOZZLE PLASTIC 3 HOLES (Optional)
11 ROUND BRUSH NYLON BRISTLES
12 TRIANG.BRUSH NYLON BRISTLES
13 T
RIANG.BRUSH STAINL.STEEL B. (Optional)
14 DETAIL BRUSH NYLON BRISTLES
15 DETAIL BRUSH BRASS BRI
STLES
16 DETAIL BRUSH STAINL.STEEL BRISTLES
17 ROUND BRUSH BRASS BRISTLES (Optional)
Steam / Vacuum kit (VC 6000 FULL):
Optional
18 STEAM/VAC HOSE 4 m with handle and plug
19 STEAM/VAC EXTENSION (2)
20 FLOOR BRUSH
21 FLOOR BRUSH ACCESSORY
22 FLOOR BRUSH LIQUID SUCTION ACCESSORY
23 GLASS CLEANER L=25
24 GLASS CLEANER L=12
25 UPHOLSTERY BRUSH STEAM AND VAC
26 CARPET ACCESSORY UPHOLSTERY BRUSH
27 DETAIL NOZZLE L. = 90 mm
27a DETAIL NOZZLE L. = 350 mm
28 DETAIL NOZZLE 3 HOLES
29 VAC TRASPARENT ACC.
FOR DETAIL STEAM NOZZLE
30
VAC TRASPARENT ACC.
FOR DETAIL STEAM NOZZLE
31 TRIANGULAR BRUSH
32 DETAIL
BRUSH IN NYLON FOR NOZZLE
33 VACUUM HOSE
34 ROTATING BRUSH D.35 BLACK
35 NOZZLE LANCE D=35 BLACK
36 RADIATOR BRUSH D=35 BLACK
37 TELESCOPIC EXTENSION BLACK
WITH BUTTON
38 VAC BRUSH BLACK
39 VAC NOZZLE LARGE D=35 BLACK
40 MULTIPURPOSE BRUSH
8
5
6 7