Use and Care Manual
4
11
10
13
9
6
1
2
7
5
4
14
8
12
3
Cleaning System details
1. Main switch with light
2. Boiler switch with light
3. Vacuum switch (only VC 6000 FULL)
4. Socket
5. Pressure gauge (optional)
6. No water warning light
7. Work enable pilot light
8. Safety cap with water level sensor
9. Steam adjustment
10. Water tank
11. Detergent tank
12. Detergent adjustment (only VC 6000 FULL)
13. Power cord
14. Cleaning boiler cap
15. Steam switch
16. Water switch
17. Red switch
18. Detergent connection tubes
19. Water connection tubes
20. Vacuum switch
21. Electrical sensor
22. “O” ring safety cup
Ste
am hose (1)
Steam/Vac hose (18)
Vacuum Handle (33)
SP35
SP35 A
17
15
1
7
16
9
GROUNDING INSTRUCTIONS
If the unit should malfunction or break down, grounding provides a path of least resistance of electrical
Current to reduce the risk of electrical shock. The uniti s equipped with a cord having an equipment grounding
conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly grounded
in accordance with all local codes and ordinaces.
WARNING – Improper connection of the equipment-grounding conduct
or can result in a risk of electric
Shock. Check with a qualified electrican or service person if you are in doubt a sto whether the outlet is
Properly grounded. Do not modify the plug provide with the appliance – if i twill not fit the outlet, have a
proper outlet installed by a qualified electrician.
This units is designed for use with a normal 110/120 volt circuit, and has a grounded plu that looks like the
Plug illustrated in
sketch (A). A temporary adaptor that looks like the one illustrated in stretch (B) or (C)
May be used to connect the plug to a 2 pole receptable as shown in stretch (B) if a properly grounded outlet
is not available. The temporary adapter should only be used until a properly grounded outlet sketch (A) can
be installed by a qualified electrician. Whenever the adapter is used, it must be held in place by a metal screw.
4 9