Installation Guide

Victory Bracket Installaon Guide & Warranty Informaon 7
External Mounting Options
The versale Victory Bracket can also be mounted externally in a
variety of ways.
1 – Install bracket aer countertop is in place.
2 – If mounng to a structural wall, be sure to aach brackets to
the wall studs or a minimum ¼" thick backing material. Do
not mount bracket to drywall alone.
3 – Make sure bracket ts ghtly on wall surface and against
boom of countertop.
4 – Using bracket as a template, mark and drill ⅛" pilot holes ½"
deep.
5 – Aach bracket to outside of wall using a ¾" wood screw in
each hole.
6 – Apply caulk along sides of bracket under countertop.
Opon 1: Mount to Cabinet
wall thickness usually ¾" to 2"
Opon 2: Single Level, Wall Mount
wall thickness usually 4"
Opon 3: Two Level, Wall Mount
wall thickness usually 4"