Installation Guide

Victory Bracket Installaon Guide & Warranty Informaon 4
Internal Mounting Options
The Victory Bracket can be mounted inside a cabinet or structural
wall in a variety of ways.
Opon 1A: Mounng Bracket to Back or Side of Cabinet
1 – Notch top wall ½” by 2 ⅛”. Cut ½” radius on inside wall.
2 – If mounng to side of cabinet, use a jigsaw to cut a slot at
least ½" by 2 ⅛" in any support that obstructs the bracket’s t.
3 – Using bracket as a template, mark and drill ⅛” pilot holes ½”
deep.
4 – Make sure bracket ts ghtly on wall surface.
5 – Aach bracket to wall using ¾” wood screw in each hole.
6 – Install countertop and apply caulk along sides of bracket
under countertop.
Opon 1: Mount to Cabinet
wall thickness usually ¾" to 2"
Opon 2: Single Level, Wall Mount
wall thickness usually 4"
Opon 3: Two Level, Wall Mount
wall thickness usually 4"