Installation Guide

Victory Bracket Installaon Guide & Warranty Informaon 3
Bracket Size Selection
The Victory Bracket is designed to support overhangs between
8" and 20". The wall thickness must be between ¾" and 4". If
necessary, aach plywood to inside of the cabinet wall to meet
the minimum thickness requirement.
When mounng behind the cabinet or structural wall, the chart
below can be used to nd the correct bracket size for your
countertop.
When mounng externally, subtract 2" from your overhang
length and select the closest bracket size.
Bracket Spacing Calculation
The two outer brackets should be placed 3" from the end or
corner of the countertop. The spacing between brackets can be
determined using the formula below:
Spacing (S)
=
Width (
W) – 6
# of Brackets – 1
Legend
Bracket
Distance to
End/Corner
W Width S Spacing
Overhang Length
8" 10" 12" 14" 16" 18" 20"
Wall Thickness
¾" 8" 8" 10" 12" 12" 14" 16"
2" 8" 10" 10" 12" 14" 16" 16"
3" 10" 10" 12" 14" 14" 16" N/A
4" 10" 12" 12" 14" 16" 16" N/A