Installation Instructions

ManualsBrandsUnbranded ManualsIndoor LightingThe Smart Electrician® 1910 Lumens 24 x 3 LED Double Strip Light

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST)

3. READ AND SAVE THESE INSTRUCTIONS.

348-0035 / 348-0036

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box.

Fig.1

PC Diffuser

Fixture Plate

1. Open the PC diffuser by squeezing and pulling out.

Remove the hardware package which locate in fixture.

Page 1 / 6

Important to Know

1. Read all instructions carefully before installation and operation.

2. If you are not familiar with state and local electrical codes, it is recommended that you consult with a qualified electrician.

3. Units can be linked together in series from one power supply. Link up to 12pcs x 48" bar lights (#348-0035) together, link

up to 24pcs x 24" bar lights (#348-0036) together, or link combination of sizes together.

4. Do not use in wet locations, use indoors only.

5. Non-replaceable LEDs.

6. Caution: LEDs emit bright light. Avoid looking directly into the light source for prolonged periods to avoid eye damage.

7. Not to be used with a dimming circuit or any other electronically controlled switch.

8. Specification:

Installation Steps

NO.

48 2 3.25

2 3.25 30W

60W

Dimension(inch)

Item #.

348-0036

348-0035

Watts

Hardware Package (Included):

Anchor (A)

Dry Wall Screw (B)

Linking Cord (C)

Plastic Connector (D)

Summary of content (6 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS 348-0035 / 348-0036 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST) 3. READ AND SAVE THESE INSTRUCTIONS. Hardware Package (Included): Anchor (A) Dry Wall Screw (B) Linking Cord (C) Plastic Connector (D) Important to Know 1.
PAGE 2
Set Screw Aluminium Plate LED Strip Male Connector Female Connector Female Connector Wire Nut Male Connector Fig.2 Fixture Plate 2. Unscrew two set screws and then remove the aluminium plate. Unplug the connectors to separate the terminal wires and grounding wire inside the light fixture. Ceiling Outlet Box Wire Nut Key hole slot Anchor (A) Fixture Plate Dry Wall Screw (B) Fig.3 3.
PAGE 3
Fixture Plate Male Connector Female Connector Female Connector Aluminium Plate Male Connector Set Screw LED Strip Fig.4 Fixture Plate 8. Plug the male connectors into female connectors. Attach the aluminium plate to fixture plate, and then secure it with two set screws. (See Fig.4,5) Aluminium Plate Fig.5 Set Screw Fig.6 Fig.7 Fixture Plate 9.
PAGE 4
Connecting fixture to fixture: The LED strip lighting fixtures can be connected together in series using included plastic connector or linking cord. Link up to 12pcs x 48" bar lights (#348-0035) together, link up to 24pcs x 24" bar lights (#348-0036) together or link combination of sizes together. Plastic Plug Remove the plastic plugs from fixtures, where need plug plastic connector or linking cord into LED light fixture. The First Fixture Plastic Plug Fig.8 The Second Fixture A.
PAGE 5
B. Using linking cord: Previously Installed Fixture Fig.10 Linking Cord (C) Additional Fixture LED Strip Lighting Fixture Using linking cord to connect two more LED strip lighting fixtures: Each additional fixture (not included) should be mounted in the same way as the previously installed fixture. Once installed, attach the linking cord (12 inches) into the input receptacles between the previously installed fixture and the additional fixture . (See Fig.
PAGE 6
In case of damaged or missing parts, please call us toll-free at 1-800-887-6326 Contents of Spare Parts: Anchor (A) Dry Wall Screw (B) Assembly Kit 5403MM (1 SET) Plastic Connector (D) 7120PC(1PC) Linking Cord (C) 7121LC(1PC) Plastic Lens 9741PL(1PC) FOR 348-0035 9742PL(1PC) FOR 348-0036 Plastic Plug 5413PA (2PCS) 5-YEAR LIMITED WARRANTY: This smart electrician fixture carries a limited warranty against defects in material or workmanship.