SDS

Page 3/8
Safety Data Sheet (SDS)
OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.
Issue date 04/14/2016 Reviewed on 04/14/2016
Trade name: Tick & Mosquito Guard
42.2.3
·
Indication of any immediate medical attention and special treatment needed:
No further relevant information available.
5
Fire-Fighting Measures
·
Extinguishing media:
·
Suitable extinguishing agents:
CO
, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
·
Special hazards arising from the substance or mixture:
No further relevant information available.
·
Advice for firefighters:
·
Protective equipment:
As in any fire, wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent)
and full protective gear to prevent contact with skin and eyes.
6
Accidental Release Measures
·
Personal precautions, protective equipment and emergency procedures:
Not required.
·
Environmental precautions:
Dilute with plenty of water.
Do not allow to enter sewers/surface or ground water.
·
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (i.e. sand, diatomite, acid binders, universal binders, sawdust).
Ensure adequate ventilation.
Dispose of the collected material according to regulations.
·
Reference to other sections:
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7
Handling and Storage
·
Handling
·
Precautions for safe handling:
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
·
Information about protection against explosions and fires:
No special measures required.
·
Conditions for safe storage, including any incompatibilities:
·
Storage
·
Requirements to be met by storerooms and receptacles:
No special requirements.
·
Information about storage in one common storage facility:
Not required.
·
Further information about storage conditions:
None.
·
Specific end use(s):
No further relevant information available.
8
Exposure Controls/Personal Protection
·
Additional information about design of technical systems:
No further data; see section 7.
·
Control parameters:
·
Components with occupational exposure limits:
The product does not contain any relevant quantities of materials with critical values that have to be monitored
at the workplace.
·
Additional information:
The lists that were valid during the creation of this SDS were used as basis.
(Contd. on page 4)