Manual

Timing Mechanism
1. Left and Right Arrows allow you to select the next entry eld within the same menu line. Any
changes will be saved after you exit that entry eld.
2. Up and Down Arrows allow you to scroll up and down through the menu items.
3. LCD Panel is the display screen.
4. Input Dial allows you to scroll through the value selection within the selected entry eld.
5. Home Key allows you to exit from any function menu and return the controller to normal operation.
After pressing the Home key, all modications to the settings will be saved.
6. Manual Watering Menu Key allows you to activate station(s) or program(s) manually.
7. Scheduled Watering Menu Key allows you to create/modify irrigation programs. Use this function to
assign the program type (Standard or Grow- In), watering days, start times, end times, delay times, syringe
duration, repeats, soak time, stations, run times and maximum simultaneous stations per program.
8. Diagnostics Menu Key allows you to run communications test with each decoder and solenoids.
9. Station Settings Menu Key allows you to modify station parameters. Within this setting, you can set
the station number and assign it to a specic decoder, decoder station and path, specify each station’s percent
adjust, disable the station from any activity by placing a station hold for a specic number of days, set the sta-
tion type to a switch and create or edit the station description/name.
10. Percent Adjust Menu Key allows you to adjust watering to a specic percentage range. e user can
specify percentage adjustment for the system, programs and stations.
11. Start Key will execute selected program or manual operation.
12. Pause/Resume Key will pause currently activated program(s). To resume operation, press the pause key
again and select Resume.
13. Stop Key will cancel currently running program(s) or station(s).
14. System Settings Menu Key allows the user to modify the controller parameters. Users can specify the
hold duration for controller’s activity, set language, time, date, day change, station delay, maximum number of
stations to run simultaneously, adjust display contrast and specify sensor type. Within this menu, the user can
also reset all programs, reset the station parameters and reset all disables.
TDC-100/200
HOME
%ADJUST START PAUSE/
RESUME
STOP SYSTEM
SETTINGS
MANUAL
WATERING
SCHEDULED
WATERING
DIAGNOSTICS STATION
SETTINGS
1
2
3
4
5 6 7 8
9
10 11
12
13 14
4