Manual

Pause / Resume

The Pause command is used to suspend active program or manual irrigation. The Pause function allows the user

to specify the pause duration.

Pause / Resume Function Directions

Pause function example: Program 01 has been manually activated. Pause program 01 for 30 minutes.

1. Press the Pause key.

2. Use the input dial to select All, M-Man or Prg:XX (XX = the program number). If multiple

programs are active, use the right arrow key to advance to the program number field before using the

input dial to select the correct program number. For this example, select Prg: 01.

3. Press the down arrow key to advance the cursor to the for: field. Use the input dial and

the right arrow key to select the pause duration in hours and minutes. For this example, set the pause

duration to 00 hr 30 min.

The display should read:

Pause: Prg: 01

for: 00hr 30 min

Press PAUSE to pause

00 Programs Paused

Note: The default pause time is 0 hr 05 min minutes.

4. Press the Pause key to initiate the Pause function.

Resume Controller Activity example: Reactivate Program 01 when Paused.

1. Press the Pause key.

2. Use the input dial until the correct program or multi-manual operation is displayed.

For this example, select Resume: Prg: 01.

The display should read:

Resume: Prg: 01

Press PAUSE to pause

01 Programs Paused

3. Press the Pause key to release the Pause function.

Pause Function TDC-100/200 Action

Pause Program XX Allow the start of other programs, multi-manuals and syringe. If the start time of the

paused program occur’s again while still on Pause, that runtime will be stacked (delayed

until the first occurrence is completed).

If Program XX is already on Pause or Pause All is in effect, the new pause time-out will

override the remaining pause time for program XX.

Pause Multi-Manual Allows any program or syringe start. If a new multi-manual is activated, the previous will

be canceled.

If Multi-Manual is already on Pause or Pause All is in effect, the new pause time-out will

override the remaining pause time for the multi-manual.

Pause Syringe Allows any program or manual start. If a new syringe is activated for the same paused

syringed program, the pause will be cancelled and activity will resume with the new

runtime.