Manual
Syringe - Choose Syringe to activate all the stations in a selected irrigation program for a specied runtime.
Note: e Maximum number of simultaneous stations set in the program still applies.
Manual Syringe Activation Directions
Syringe activation example: Manually activate all the stations in Program 3 for 2 minutes each.
Note: An irrigation program must be congured to activate Manual Syringe.
1. Press the Manual Watering key .
2. e cursor should be located in the Manual eld. Use the input dial to select Syringe.
3. Press the down arrow key to advance the cursor to the Runtime: eld. Use the input dial to
select the runtime duration in minutes. For this example, set the value to 02 minutes.
Note: e Runtime setting in Syringe will not aect the actual runtime in the program.
4. Press the down arrow key to advance the cursor to the Program: eld. Use the input dial to
select the program to syringe. For this example, select program 03.
5. Once the correct program is selected, press the Start key to activate or press the Home key to cancel
and revert back to the default display.
When nished, the display should read:
Manual: Syringe
Runtime: 02 min
Program: 03
Press START to water
Start Program - Select Start Prog to activate a watering program regardless of its set start time.
Manual Program Activation Directions
Start Program example: Manually activate Program 08.
Note: An irrigation program must be congured to activate Manual Program. A program on hold can still be
manually activated.
1. Press the Manual Watering key .
2. e cursor should be located in the Manual eld. Use the input dial to select Start Prog.
3. Press the down arrow key to advance the cursor to the Program: eld. Use the input dial to
select the program to activate. For this example, select program 08.
4. Once the correct program is selected, press the Start key to activate or press the Home key to cancel
and revert back to the default display.
When nished, the display should read:
Manual: Start Prog
Program: 08
Press START to water
14