Instructions / Assembly

ASSEMBLY INSTRUCTIONS
7
STEP 5
5-1. Unpack the reflector pack and take out the paper.
5-2. Slide two reflector panels together. Insert one bolt
M6 x 10 and screw on cap nut loosely.
5-3. Repeat procedure to complete the assembly of all
four sections. Fully tighten all of the bolts in the rolled dege.
STEP 6
6-1. Put ยข8 mm washer on each reflector support bolt.
6-2. Fasten the reflector with 3 pcs M8
mmcastle nuts.
STEP 7
7-1. Lift the tank housing and rest it on the post plate.
7-2. Connect the other end of gas hose to the regulator and
secure with metal clamp. (For gas hose with threaded
connectors,bind 2 or more rounds of plumbing tape around
the regulator outlet connector before connecting the gas
hose for security.)
7-3. Connect the regulator to the gas cylinder and tighten it
with adjustable wrench.
7-4. Put gas cylinder on the stand.
7-5. Place the cylinder housing on the base vertically.