Installation Guide

FOR MORE INFORMATION PLEASE VISIT THE TUFFBLOCK WEBSITE:
INSTALLATION GUIDE
STEP 6
ATTACH REMAINING FLOOR JOISTS.
Position and attach the remaining oor joists to the trim
boards using two 75mm (3 inches) counter sunk batten
screws to attach the oor joist to the trim board.
STEP 7
POSITION REMAINING TUFFBLOCK PIERS.
Using the frame as a guide, position the remaining TuffBlock
piers directly beneath the frame. The blocks on the perimeter
of the deck should be 300mm (12 inches) in from each end.
When positioning the blocks, the dimensions do not need to
be exact, however, do not exceed the maximum span of 1.5
metres (5 feet) between blocks, just be sure to have all of the
TuffBlock Piers aligned in a straight row and spaced evenly.