Product Literature
T7 SERIES ROTORS
www.toro.com / e Toro Company, Irrigation Division / 5825 Jasmine Street, Riverside, CA 92504 / 877-345-8676 / Specications subject to change without notice / © 2015. All rights reserved / P/N 15-5051-IG
* Pre-installed nozzle
Data based on 180°
Nozzle
Press.
(PSI)
Radius (FT)
Flow Rate
(GPM)
Precip Rate
(in/hr) ▲
Precip Rate
(in/hr) ■
7.0
40 46.3 6.81 0.715 0.620
50 48.7 7.41 0.746 0.646
60 49.0 8.10 0.782 0.677
70 50.3 8.90 0.824 0.714
80 52.0 9.67 0.827 0.716
90 52.0 10.27 0.845 0.732
100 53.3 10.85 0.827 0.716
9.0
40 47.3 7.54 0.759 0.657
50 50.7 8.25 0.734 0.635
60 50.3 8.91 0.762 0.660
70 52.0 9.81 0.807 0.699
80 53.7 10.49 0.800 0.693
90 53.3 11.20 0.823 0.713
100 54.0 11.83 0.839 0.727
12.0*
40 50.3 9.95 0.885 0.767
50 53.3 10.55 0.902 0.781
60 56.7 11.53 0.913 0.791
70 59.0 12.54 0.956 0.828
80 59.7 13.51 0.993 0.860
90 60.7 14.38 1.020 0.883
100 63.0 15.18 1.039 0.900
16.0
40 52.3 13.42 1.062 0.920
50 57.0 14.96 1.061 0.919
60 60.0 15.79 1.044 0.904
70 61.0 17.13 1.094 0.948
80 63.7 18.41 1.100 0.953
90 64.3 19.64 1.136 0.984
100 65.7 20.80 1.166 1.009
20.0
40 52.0 16.10 1.275 1.104
50 57.3 18.40 1.216 1.053
60 61.0 19.56 1.209 1.047
70 63.7 21.01 1.256 1.087
80 66.3 22.58 1.188 1.029
90 68.0 23.99 1.225 1.061
100 70.3 25.29 1.253 1.085
24.0
40 53.7 15.46 1.272 1.101
50 60.3 17.69 1.093 0.946
60 63.7 19.76 1.107 0.959
70 66.3 21.61 1.138 0.985
80 68.3 23.29 1.154 0.999
90 70.0 24.87 1.196 1.036
100 72.3 26.30 1.160 1.005
27.0
40 55.0 19.37 1.424 1.233
50 64.3 21.98 1.157 1.002
60 71.0 23.82 1.051 0.910
70 72.3 25.67 1.101 0.954
80 73.0 27.34 1.141 0.988
90 74.3 29.03 1.179 1.021
100 75.0 30.52 1.207 1.045
Nozzle Performance Data-High Flow Models
Additional Features
• Standard check valve
• Radius reduction screw – up to 25%
• Threaded cap-retained riser assembly
• Variable reversing stator
• Slip clutch
• Riser pull-up feature – adjustment /pull-up tool supplied
• Locking cap screw
Dimensions
• Body diameter: 2.7”
• Body height: 8.8”
• Rubber cover diameter: 2.2”
• Pop-up height to nozzle: 5.75”
Specifying Information—T7 Sprinkler
T7PSS-42XX
Description Optional Thread Optional
T7P SS 42 X
T7P—Sports Rotor SS—Stainless Steel Riser
ACME Thread
E—Effluent
L—Low Flow
Example: A low flow T7P sprinkler with a stainless steel riser and effluent rubber cover would be specified as T7PSS-42LE
Nozzle Performance Data-Low Flow Models
Nozzle
Press.
(PSI)
Radius (FT)
Flow Rate
(GPM)
Precip Rate
(in/hr) ▲
Precip Rate
(in/hr) ■
2.0
40 40 1.73 0.25 0.22
50 42 1.96 0.29 0.25
60 42 2.17 0.30 0.26
70 41 2.36 0.33 0.28
80 42 2.54 0.35 0.31
90 41 2.71 0.36 0.31
100 41 2.88 0.38 0.33
3.0*
40 41 2.43 0.36 0.31
50 42 2.77 0.39 0.33
60 41 3.10 0.41 0.36
70 41 3.38 0.45 0.39
80 42 3.64 0.46 0.40
90 41 3.89 0.47 0.41
100 43 4.06 0.49 0.42
4.5
40 38 4.07 0.63 0.54
50 41 4.65 0.62 0.53
60 41 5.17 0.68 0.59
70 42 5.64 0.71 0.62
80 42 6.08 0.77 0.66
90 43 6.49 0.78 0.68
100 43 6.88 0.83 0.72
6.0
40 43 4.92 0.59 0.51
50 46 5.63 0.59 0.51
60 48 6.27 0.61 0.52
70 50 7.05 0.65 0.57
80 49 7.37 0.68 0.59
90 50 7.87 0.70 0.61
100 50 8.37 0.74 0.64
7.5
40 44 5.78 0.66 0.58
50 46 6.63 0.70 0.60
60 48 7.37 0.71 0.62
70 50 8.05 0.75 0.65
80 51 8.73 0.78 0.67
90 52 9.46 0.84 0.73
100 52 9.89 0.81 0.70
9.0
40 45 7.33 0.81 0.70
50 49 8.44 0.78 0.68
60 51 9.39 0.80 0.70
70 54 10.43 0.83 0.72
80 55 11.27 0.83 0.72
90 55 12.05 0.89 0.77
100 56 12.74 0.90 0.78
Operating Specifications
• Inlet size: 1” threaded ACME
• Radius:
- Low-flow models: 38’ – 53’
- High-flow models: 46’ – 83’
• Flow rate:
- Low-flow models: 1.7 – 12.7 GPM;
6 nozzle tree included with each head (2, 3, 4.5, 6, 7.5 and 9)
- High-flow models: 6.8 – 30.5 GPM;
7 nozzle tree included with each head (7, 9, 12, 16, 20, 24 and 27)
• Operating pressure: 40-100 psi
• Arc adjustment: 45° - 360° (unidirectional at 360°)
Warranty
• Five years