Users Manual

Shock button within 10 seconds after the sound Bee~,
you can hear a sound Bee~ again , which means the
pairing is successfully.
5. If you have 2 or 3 receivers just choose the different
channels, and pair as the above steps.
Note:
Please remember the channel you have chosen to pair, if you
use another channel without pairing, you can't control the
receiver.
Test the training collar set (After paired successfully)
1. Test the Shock function
Take out the test bulb and put it on the
Receiver's contact point
Press the Shock button (make sure the level above 01).
The test bulb will be on
2. Test the Vibration function
Press the Vibration button (make sure the level above 01)
The receiver will vibrate
3. Test the Sound function
Press the Sound button （don’t need to adjust the level)
The Receiver will sound bi~bi~
How to wear the Receiver to your pet
1. Put the Receiver on dog's neck