Users Manual

5. Please charge them fully before you keep them idle for a
long time, it's necessary to charge them every month.
Auto Power Saving Function:
1. If there is no operations on the remote control within 10
seconds, the back lit of screen will be off. If there is no
operations within 30 seconds, the remote control will be in
sleep mode, and the screen display will be shut off.
Pressing any buttons can activate the Remote.
2. If there is no signal in the receiver within 5 minutes, it
will go into standby mode; you could press Shock or
Vibration or Sound button to activate it.
3. You could turn the receiver OFF by pressing the power
button of the Receiver.
Pair the Remote Control with Receiver
1. Press the shock button or vibration button to turn on the
Remote
2. Choose a channel CH1 or CH2 or CH3 by pressing the CH
button
3. Adjust the level by pressing + or — button, make sure the
level above 01
4. Press the Power button of the receiver for 3 seconds, you
will hear a sound like Bee~, and the indicator light is
flashing; Then quickly, Press the Vibration button or