Users Manual

Please charge the Remote Control and the Receiver
before use it at the first time.
1. Charge the remote control:
1.1. Plug the cable into the charging hole.
1.2. Connect the USB charging adapter and plug it into
outlet.
1.3. When it’s charged, the battery icon in the screen will
be flashing; after charged fully, it will stop flashing.
2. Charge the receiver:
2. l. Open the rubber cover of the receiver's charging hole.
2.2. Plug the cable to the charging hole
2.3. Connect the USB charging adapter and plug it into outlet.
2.4. The indicator green LED light up like breathing;
After being charged fully, the green LED light will stop
breathing and always on.
NOTE:
1. Please charge the remote control and receiver for more
than 5 hours at the first charging.
2. When the receiver is charged, it's in sleep mode, and can't
receive the signal from the remote control.
3. There will be showing empty battery icon on the screen of
the remote control if it's low power.
4. If the receiver running out of power, the indicator light
will be on per second.