Dog Training Collar Manual Please Read the Manual before Use The pictures maybe different from the actual product please in kind prevail!
Features 1. Rechargeable: Rechargeable Remote Control and Receiver 2. It works well, even in rainy day. 3. Adjustable Levels: The adjustable level of Vibration mode and Shock mode are 01-06. 4. Three training mode: Shock/Vibration /Sound. 5. Three channels: Select the channel, up to 3 Receivers and1 Remote Control. 6. Automatic power saving: If no operations within 5 minutes, the Remote Control and Receiver will go into standby mode. Tips 1.
Key Definition ① Antenna: Transmit the signal strongly. ② LCD screen : Display modes, levels and channels. ③Shock button: Turn on the screen, press the Shock button, press the + or - button to adjust the level from 01-06,press the Shock button to make the receiver shock again. ④ Vibration button: On the screen, press the Vibration mode, press+/-button to adjust the levels from 01-06, press Shock button to make the receiver vibrate again.
Please charge the Remote Control and the Receiver before use it at the first time. 1. Charge the remote control: 1.1. Plug the cable into the charging hole. 1.2. Connect the USB charging adapter and plug it into outlet. 1.3. When it’s charged, the battery icon in the screen will be flashing; after charged fully, it will stop flashing. 2. Charge the receiver: 2. l. Open the rubber cover of the receiver's charging hole. 2.2. Plug the cable to the charging hole 2.3.
5. Please charge them fully before you keep them idle for a long time, it's necessary to charge them every month. Auto Power Saving Function: 1. If there is no operations on the remote control within 10 seconds, the back lit of screen will be off. If there is no operations within 30 seconds, the remote control will be in sleep mode, and the screen display will be shut off. Pressing any buttons can activate the Remote. 2.
Shock button within 10 seconds after the sound Bee~, you can hear a sound Bee~ again , which means the pairing is successfully. 5. If you have 2 or 3 receivers just choose the different channels, and pair as the above steps. Note: Please remember the channel you have chosen to pair, if you use another channel without pairing, you can't control the receiver. Test the training collar set (After paired successfully) 1.
2. Make sure the contact point reaches to the skin of dog, and choose the suitable metal cap. 3. Adjust the belt collar, make sure your dog feels comfortable. F.A.Q Q: What’s the length of this training collar? A: 23.6 IN (60 CM) Q: How much weight of dogs does this training collar suits for? A: above 20 lb. Q: Is the Receiver waterproof? A: Yes, it's totally waterproof. Q: How long does my dog get training every time? A: 10-15 min. Q: What should I do if the training collar set doesn’t work? A: 1.
1．Frequency: 433MHZ 2．Transmitter: 2.1、Battery Capacity：3.7 V300ma LIP 2.2、Electric Charging Voltage：USB DC 5V 2.3、Electric Charging Current：200mA 2.4、Discharging Current：100mA 2.5、External Size：120*50*38mm 2.6、External Material：ABS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The Main Accessories: Thank you very much for choosing our product
